Electrolux EOY5851AAX Bedienungsanleitung PDF herunterladen (Seite 40)

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

Valid for telescopic runners:

The retaining pins on the tele-

scopic runners must point to the

front.

12.3 Lamp

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass cov-

er can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the lamp at the cavity

ceiling:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Install the glass cover.

Replacing the lamp on the left side of

the cavity.

1.

Remove the left shelf support.

2.

Use a narrow, blunt object (e.g. a tea-

spoon) to remove the glass cover.

Clean the glass cover.

3.

Replace the lamp with a suitable 300

°C heat-resistant lamp.

4.

Install the glass cover.

5.

Install the left shelf support.

12.4 Cleaning the oven door

Removing the door and the glass panels

You can remove the oven door and the

internal glass panels to clean it. The num-

ber of glass panels is different for different

models.

WARNING!

Be careful when you remove the

door from the appliance. The door

is heavy.

A

A

1.

Open the door fully.

2.

Fully press the clamping levers (A) on

the two door hinges.

3.

Close the oven door to the first open-

ing position (approximately 70° angle).

4.

Hold the door with one hand on each

side and pull it away from the appli-

ance at an up angle.

40

www.electrolux.com

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare