Electrolux RO400B Bedienungsanleitung

Connecting the reject water hoseThe reject water hose (for discharge of water to a house-hold waste pipe) can be extended up to 4 metres. The smallest

Connecting the applianceBefore moving the RO 400 into its permanent place,remove the three protection caps and the protector underthe prefilters. Then

12The flushing procedureYou have to work through the steps of the flushingprocedure when the RO 400:• is brand-new and has never been used before• is

If the RO 400 has not been used for a time,it may take up to 60 seconds before theoptimum water purification level is reached,as shown by lights on th

14Replacing the filtersIt is important to replace the filters (in the filter containers)as soon as they need replacing, since their main function isto

15MAINTENANCE

16DescalingIn time, the substances which the appliance removes fromyour drinking water tend to clog the membrane and willeventually reduce the flow of

17MAINTENANCE7 While the spigot is still on (open), disconnect theelectrical plug, see Fig. B. Then turn off the spigot. Nowleave the water purifier l

To clean the gridThe grid (a coarse filter) is designed to intercept large particles and islocated inside the connection for the feed water on the app

19REGULAR CARE OF THE RO 400Listed below are the things you need to rememberin the regular care of your water purifier. The points are listed in the o

THANK YOU for choosing the RO 400 water purifier.We are confident it will give you many years of trouble-freeservice.To achieve the best results when

20Dimensions WeightCapacity (water temp. 15 °C)Water efficiencyElectrical supplyTotal power consumptionOperation periodSound level when installed in u

21IF THE RO 400 STOPS WORKINGTrouble-shooting tableTo protect both the user and the appliance itself from incorrect use, the RO 400 has built-in war

22IF THE RO 400 STOPS WORKINGSYMPTOMS POSSIBLE CAUSE ACTION TO TAKEThe membrane may be cloggedThe hose for purified water is not pressedall the way h

23IF THE RO 400 STOPS WORKINGTo adjust the spigot1 Disconnect the electrical plug.2 Pull the main spigot pipe straight upwards as illustrated(Fig. A.

01-09

822 90 16-15 3Unpacking...6Identification of materials ...

4The RO 400 Direct Flow is a very safe appliance, but even so it is important that everyone usingit should be thoroughly familiar with the way it wor

5Concerning the use of the RO 400• The RO 400 is designed to produce the quantityof water normally required for cooking, drinks,washing dishes and ge

6YOUR NEW WATER PURIFIERUnpackingIf the appliance has been damaged during transportation,you should immediately notify the company responsiblefor deli

7GENERAL VIEW OF THE APPLIANCEFilter containerBase plateFilter container Control panel673315894210Supplied with the RO 400:1 Bracket for reject water

8You should read the section entitled "Safety Information" before starting work on the actualinstallation of the water purifier.INSTALLATION

9Electrical and plumbing connectionsThe illustration reproduced in Fig. C is also to be foundon the rear of the appliance, to show how the variousconn